Please click on appropriate links below to view the corresponding technical specification for each of the eDIN family.
Refer to the User Guide for full details on the installation and programming of eDIN modules and systems. This can be downloaded from the download page .
All eDIN modules carry the CE Mark and are fully compliant with EC EMC and LV Directives.
eDIN modules comply with RoHS and WEEE Directives
eDIN Network Power Supply
Part code
DIN-PSU-24V
DIN Module Size
3M
Dimensions
56mm Wide x 100mm High x 64mm Deep
Weight
0.34Kg
Input Voltage
230 Volt +/- 10% 50-60Hz, single phase
Input Connections
5mm rising-cage screw terminals. Maximum wire size 2.5mm²
Control Input
Mode M-BUS
M-BUS Connection
1 x RJ-45, 1 x 4-way Rising-cage 5mm screw terminals, 1.5mm²
M-BUS Output Current
800mA
Outputs
Each eDIN System requires at least one DIN-PSU-24V. If the M-BUS current requirements exceed 1000mA additional DIN-PSU-24v Modules should be used.
Module Loading @ 230V
0.25A maximum
Standards (CE, EMC)
EN55015, EN61547, EN61000-3-3 , EN60669-1 and EN60669-2-1
'Click Here' to download the datasheet for this product 'Click Here' to download the User Guide for full details on the installation and programming
Network Processor Unit
Part code
DIN-NPU-00-01
DIN Module Size
6M
Dimensions
104mm Wide x 100mm High x 64mm Deep
Weight
0.35Kg
Input Voltage
24v DC - Supplied through M-BUS Connection
Input Connections
M-Bus Connection
Control Input/Output (1)
Mode M-BUS
M-BUS Connection
2 x RJ-45 (in and out)
M-BUS Current Consuption
250mA
Control Input/Output (2)
RS232 (Bi directional)
RS232 Connection
1 x 5-way Rising-cage 5mm screw terminals. Maximum wire size 1.5mm²
Control Input/Output (3)
Ethernet (for TCP/IP, UDP, NTP etc.)
Ethernet Connection
1 x RJ-45 (10/100 MBits)
Standards (CE, EMC)
EN55015, EN61547, EN61000-3-3 , EN60669-1 and EN60669-2-1
'Click Here' to download the datasheet for this product 'Click Here' to download the User Guide for full details on the installation and programming
4 x 3A Dimmer Module
Part code
DIN-03-04
DIN Module Size
9M
Dimensions
156mm Wide x 100mm High x 64mm Deep
Weight
0.95Kg
Power Input
230 Volt +/- 10% 50-60Hz, single phase
Input Connections
5mm rising-cage screw terminals. Maximum wire size 2.5mm²
Control Input
Mode M-BUS
M-BUS Connection
2 x RJ-45 (in and out)
M-BUS Current Consuption
50mA
Outputs
4 x 3A (resistive or inductive) dimmed outputs
Output Control Type
Leading edge dimming
Channel loading
3A (approx. 750W) per channel resitive or inductive load
Module Loading @ 230V
10A maximum
Standards (CE, EMC)
EN55015, EN61547, EN61000-3-3 , EN60669-1 and EN60669-2-1
''Click Here' to download the datasheet for this product 'Click Here' to download the User Guide for full details on the installation and programming
8 x 2A Dimmer Module
Part code
DIN-02-08
DIN Module Size
9M
Dimensions
156mm Wide x 100mm High x 64mm Deep
Weight
0.95Kg
Power Input
230 Volt +/- 10% 50-60Hz, single phase
Input Connections
5mm rising-cage screw terminals. Maximum wire size 2.5mm²
Control Input
Mode M-BUS
M-BUS Connection
2 x RJ-45 (in and out)
M-BUS Current Consuption
50mA
Outputs
8 x 2A (resistive or inductive) dimmed outputs
Output Control Type
Leading edge dimming
Channel loading
2A (approx. 500W) per channel resistive or inductive load
Module Loading @ 230V
10A maximum
Standards (CE, EMC)
EN55015, EN61547, EN61000-3-3 , EN60669-1 and EN60669-2-1
'Click Here' to download the datasheet for this product 'Click Here' to download the User Guide for full details on the installation and programming
4 x 5A Feed Through Relay Module
Part code
DIN-RP-05-04
DIN Module Size
6M
Dimensions
104mm Wide x 100mm High x 64mm Deep
Weight
0.43Kg
Input Voltage
24v DC - Supplied through M-BUS Connection
Input Connections
M-Bus Connection
Control Input
Mode M-BUS
M-BUS Connection
2 x RJ-45 (in and out)
M-BUS Current Consuption
80 mA
Outputs
1 x DPCO / 3 x SPCO. Maximum wire size 1.5mm²
Output Control Type
Switching only - Volt Free Contact Closures
Channel loading
5A (resistive or inductive load) per relay feed-through relays
Module Loading @ 230V
20A maximum
Standards (CE, EMC)
EN55015, EN61547, EN61000-3-3 , EN60669-1 and EN60669-2-1
'Click Here' to download the datasheet for this product 'Click Here' to download the User Guide for full details on the installation and programming
8 Channel Low-Voltage I/O Module
Part code
DIN-INT-00-08
DIN Module Size
6M
Dimensions
104mm Wide x 100mm High x 64mm Deep
Weight
0.35Kg
Input Voltage
24v DC - Supplied through M-BUS Connection
Input Connections
M-Bus Connection
Control Input
Mode M-BUS
M-BUS Connection
2 x RJ-45 (in and out)
M-BUS Current Consuption
Input Mode: 50 mA Output Mode: Up to 1000mA
Control Inputs
0-10v input or contact-closure input (configurable as closed / released / held / released after held, or timed PIR-sensor). Compatible with open-collector or Volt-Free-Contact sensors.
Control Outputs
0/1-10v output or DSI output (configurable) or DMX (1 universe)
Channel loading (input)
2mA per channel maximum
Channel loading (output)
250mA per channel maximum
Standards (CE, EMC)
EN55015, EN61547, EN61000-3-3 , EN60669-1 and EN60669-2-1
'Click Here' to download the datasheet for this product 'Click Here' to download the User Guide for full details on the installation and programming
Universal Ballast Control Module
Part code
DIN-UBC-01-05
DIN Module Size
6M
Dimensions
104mm Wide x 100mm High x 64mm Deep
Weight
0.35Kg
Mains Input
90 - 264V, 50 / 60Hz
Power Input
24V, 50mA nominal supplied through M-BUS Connection
Control Input
Mode M-BUS, 2 x RJ-45 (in and out)
M-BUS Current Consumption
Input Mode: 50 mA nominal
Inputs Types
Four channels of 0-10V, 1-10V, DSI or switched contact inputs
Output Types
Four channels of 0-10V, 1-10V or DSI outputs and one DALI universe
Channel loading (input)
2mA per channel maximum
Channel loading (output)
250mA per channel maximum
Standards
(CE, EMC & LVD) EN55015, EN61547, EN61000-3-2 and EN60669-2-1
Download the datasheet for this product Download the User Guide for full details on the installation and programming
